AUTOOL 36CM Car OBD2 Reinforced Nylon Extension Cord Male to Female Cable for Launch Easydiag/THINKDIAG/THINKDRIVER/ELM327 Cable

AUTOOL OBD2 Extension CableProduct OverviewThe AUTOOL 36cm OBD2 extension cable is a male-to-female 16-pin diagnostic extension cord designed for compatible OBD2 scan tools, including Launch Easydiag, THINKDIAG, THINKDRIVER, ELM327, and other tools using a standard OBD2 16-pin socket. It uses a pure copper core, flexible protective outer material, and a reinforced nylon braided sleeve to help protect the vehicle OBD port and maintain stable diagnostic communication.36cm / 14.1in 16-Pin OBD2 Male To Female Nylon Braided Sleeve120gCable Weight10mmCable Diameter40mmConnector Width3 YearsWarranty Click to enlargeKey FeaturesKey FeaturesThis reinforced OBD2 cable is designed to extend the diagnostic connection, reduce repeated wear on the vehicle OBD socket, and provide a more flexible connection position when using compatible scan tools.Pure Copper CoreThe internal pure copper core helps provide faster data transmission and more stable diagnostic communication between the vehicle and compatible OBD2 tools.Reinforced Nylon SleeveThe outside of the cable is covered with a protective nylon braided sleeve for better flexibility, durability, and daily workshop wear resistance.Flexible Protective Outer LayerThe cable uses flexible protective outer material designed to be environmentally friendly, non-toxic, insulating, and practical for repeated automotive diagnostic use.Short Extension DesignThe 36cm length gives enough extension for easier scanner connection without creating a long cable that takes up extra space inside the vehicle.Repeated Plug-In DurabilityAUTOOL applies an automatic production process and 8 inspection steps from injection to molding. The cable is designed to support over 10,000 plug-in cycles under proper use.Workshop ProtectionThe protective sleeve is promoted for flexibility, anti-scalding, waterproof, and anti-aging material performance. Keep the OBD contacts dry and clean before plugging in. Click to enlarge Click to enlarge Click to enlargeCompatibility And FitmentCompatibility And FitmentUse this cable as an extension between the vehicle OBD2 port and a compatible diagnostic tool with a standard 16-pin OBD2 socket. It is suitable for OBD2 extension use with Launch Easydiag, THINKDIAG, THINKDRIVER, ELM327, and similar compatible devices.Compatible Tool TypeWorks with compatible diagnostic tools that use a standard OBD2 16-pin connection.Extension PurposeExtends the vehicle OBD2 port to make tool connection easier and reduce repeated plug-in wear on the original port.Vehicle InterfaceDesigned for automotive OBD2 16-pin diagnostic interfaces. Confirm the vehicle and tool connector before ordering.Not A ScannerThis product is an extension cable only. It does not read codes, clear faults, or perform diagnostics by itself. Click to enlargeSpecificationsAUTOOL 36cm OBD2 Extension Cable SpecificationsKey details include a 360mm cable length, 40mm connector width, 10mm cable diameter, 120g weight, nylon braided protection, and a 16-pin male-to-female OBD2 connector layout.Core SpecificationsProductAUTOOL OBD2 Extension CableConnector TypeOBD2 16-pin male to femaleLength360mm / 14.1 inchConnector Width40mm / 1.57 inchCable Diameter10.00mmWeight120gMaterialNylon braided sleeve with flexible protective outer materialCorePure copper coreCompatible InterfaceCompatible diagnostic tools with a standard 16-pin OBD2 socketUse PurposeOBD2 diagnostic interface extension and vehicle OBD port protectionPackage1 × AUTOOL 36cm cableWarranty3 years warranty support Click to enlarge Click to enlarge  Core SpecificationsProductOBD2 Extension CableConnector Type16-pin male to femaleLength360mm / 14.1 inchConnector Width40mm / 1.57 inchCable Diameter10.00mmWeight120gMaterialNylon braided sleevePackage1 × AUTOOL 36cm cable Click to enlargeWhat Is In The BoxWhat Is In The BoxThe package includes one AUTOOL 36cm OBD2 extension cable. The packing image shows the cable and product package bag.Cable1 × AUTOOL 36cm OBD2 male-to-female extension cablePackageProduct package bag shown in the packing list imageIncluded AccessoriesNo extra adapters, scanner, or diagnostic device are includedBefore You Order And UseBefore You Order And UseConfirm your diagnostic tool connector before ordering. This product is a cable extension accessory, not a standalone diagnostic scanner.Extension Cable OnlyThis product does not read fault codes, clear codes, or perform diagnostic functions by itself.Check The ConnectorPlease confirm that your vehicle interface and diagnostic tool use a standard OBD2 16-pin connector.Avoid Sharp BendingDo not sharply bend the cable near the connector or pull the cable by force during use.Keep Contacts CleanKeep the OBD connector contacts dry and clean before plugging into the vehicle or diagnostic tool.Use ProperlyPlug and unplug by holding the connector housing instead of pulling the braided cable section.Warranty SupportAUTOOL provides 3-year warranty support for eligible cases. Contact support for compatibility or order confirmation.Questions And AnswersThese answers cover connector compatibility, supported diagnostic tools, cable length, material, package contents, and correct use of the AUTOOL 36cm OBD2 extension cable. Is This Cable A Diagnostic Scanner? No. This product is an OBD2 male-to-female extension cable only. It does not read fault codes, clear codes, or diagnose vehicle problems by itself. It must be used with a compatible OBD2 diagnostic tool. What Diagnostic Tools Can It Work With? It is suitable for compatible diagnostic tools with a standard OBD2 16-pin socket, including Launch Easydiag, THINKDIAG, THINKDRIVER, ELM327, and similar OBD2 devices. Please confirm the connector type before ordering. How Long Is The Cable? The cable length is 360mm / 14.1 inch. The connector width is about 40mm / 1.57 inch, the cable diameter is 10.00mm, and the cable weight is about 120g. What Materials Are Used? The cable uses a pure copper core for stable signal transmission and a reinforced nylon braided sleeve over a flexible protective outer layer. The material design focuses on flexibility, insulation, durability, and daily workshop protection. Can It Help Protect The Vehicle OBD Port? Yes. By using the extension cable between the vehicle OBD2 port and the diagnostic tool, you can reduce repeated direct plugging and unplugging on the original vehicle OBD socket. Always plug and unplug by holding the connector housing. What Is Included In The Package? The package includes 1 × AUTOOL 36cm OBD2 male-to-female extension cable. No extra adapter, scanner, or diagnostic device is included. How Should I Use The Cable Correctly? Connect the male end to the vehicle OBD2 port, then connect the female end to a compatible diagnostic tool. Avoid sharp bending near the connector, do not pull the cable by force, and keep the connector contacts dry and clean.Warranty And ContactWarranty And ContactContact AUTOOL Store if you need help confirming whether this 36cm OBD2 extension cable matches your diagnostic tool, vehicle OBD2 port, or order requirements.Pre-Sales And Product SupportUse support for connector confirmation, diagnostic tool compatibility, cable length confirmation, packing list questions, or warranty assistance.Confirm 16-pin OBD2 connector compatibility before orderingCheck fitment for Launch Easydiag, THINKDIAG, THINKDRIVER, ELM327, and similar OBD2 toolsConfirm package contents and cable dimensions3-year warranty support for eligible casesEmail Support[email protected] WhatsApp Support 86 189 2647 7404