AUTOOL 100CM Car OBDII Extension Cable 16 Pin Male To Female OBD2 Connector 16Pin Diagnostic Tool ELM327 OBD2 Extended Adapter

AUTOOL OBD2 Extension CableProduct OverviewThe AUTOOL 100CM OBDII extension cable is a 16-pin male-to-female OBD2 connector adapter for extending the connection between a vehicle OBD2 diagnostic port and compatible OBD2 diagnostic tools, including ELM327-style adapters and scan tools with a standard 16-pin socket. It uses a pure copper core, high-quality plastic and TPE outer materials, plus a protective nylon braided sleeve for flexible and durable workshop use.100CM / 1M Length 16-Pin Male To Female Pure Copper Core Nylon Braided Sleeve1mCable Length185gNet Weight10mmCable Diameter3 YearsWarranty Support Click to enlargeKey FeaturesKey FeaturesAUTOOL uses an enhanced cable structure with a pure copper core, flexible insulated outer material, nylon braided protection, and repeated inspection during production to improve daily plug-and-unplug durability.Pure Copper CoreThe inner conductor uses a pure copper core to help support faster data transmission and more stable diagnostic tool communication.Protective Nylon Braided SleeveThe cable is covered with a protective nylon braided sleeve for improved wear resistance, bend resistance, and daily workshop durability.Flexible Insulated Outer LayerThe outer cable uses high-quality plastic and TPE material for flexibility, insulation, and leakproof protection during normal diagnostic use.16-Pin Male To Female DesignOne end connects to the vehicle OBD2 diagnostic interface, while the other end connects to a compatible 16-pin OBD2 diagnostic tool.1M Practical ExtensionThe 100cm cable length helps extend the diagnostic connection, making it easier to position scan tools or ELM327-style adapters while working.Repeated Plugging DurabilityThe listing describes 8 inspection steps from injection to molding and a design intended for more than 10,000 plug-and-unplug cycles under proper use. Click to enlarge Click to enlarge Click to enlargeCompatibility And FitmentCompatibility And FitmentThis AUTOOL OBDII extension cable is designed for vehicles and diagnostic devices using a standard automotive 16-pin OBD2 diagnostic interface. It is a connection extension accessory, not a diagnostic scanner by itself.Vehicle SideSuitable for vehicles equipped with a standard 16-pin OBD2 diagnostic port.Tool SideCompatible with diagnostic tools, scan tools, and ELM327-style adapters using a standard 16-pin OBD2 connector.Main UseExtends the connection distance and helps reduce repeated plugging directly into the vehicle diagnostic port.Before OrderingConfirm that both your vehicle and diagnostic tool use a standard 16-pin OBD2 interface. Click to enlargeSpecificationsAUTOOL 100CM OBDII Extension Cable SpecificationsThe cable is a 1m / 39.37inch enhanced flexible OBD2 extension adapter with 16-pin male-to-female connectors, a 10mm cable diameter, and 185g net weight.Cable SpecificationsProductAUTOOL 100CM OBDII Extension CableConnector Type16-pin male to 16-pin female OBD2 connectorCompatible ToolsDiagnostic tools with a standard 16-pin OBD2 socket, including compatible ELM327-style adaptersLength100cm / 1m / 39.37inchNet Weight185gCable Diameter10.00mmConnector Width40mm / 1.57inchCore MaterialPure copper coreOuter MaterialHigh-quality plastic and TPE material with protective nylon braided sleeveDesign FocusFlexible extension, stable data transmission, insulation protection, and repeated plug-and-unplug use Click to enlarge Click to enlarge  Cable SpecificationsProductAUTOOL 100CM OBDII Extension CableConnector Type16-pin male to 16-pin female OBD2 connectorCompatible ToolsStandard 16-pin OBD2 diagnostic toolsLength100cm / 1m / 39.37inchNet Weight185gCable Diameter10.00mmConnector Width40mm / 1.57inchCore MaterialPure copper coreOuter MaterialTPE material with nylon braided sleeve What Is In The BoxWhat Is In The BoxThe package is simple and includes one AUTOOL 100cm OBD2 extension cable. No separate diagnostic scanner, adapter set, or software is included.Package Includes1 × AUTOOL 100cm OBD2 16-pin male-to-female extension cableNot IncludedOBD2 diagnostic scanner, ELM327 adapter, software, and extra connector adapters are not included.Before You Order And UseBefore You Order And UseCheck your vehicle port and diagnostic tool connector before purchase. This product is an OBD2 extension cable only and should be used for standard diagnostic connection extension.Extension Cable OnlyThis product is not a diagnostic scanner and does not read fault codes by itself.Confirm 16-Pin OBD2Make sure your vehicle and diagnostic device both use a standard 16-pin OBD2 interface before ordering.Use For Diagnostic ConnectionUse the cable to extend OBD2 diagnostic connections. Do not use it as a general power cable or for non-OBD wiring purposes.Avoid Excessive PullingAvoid sharp bending, crushing, or pulling the connector body by force during use.Keep Connectors CleanKeep the 16-pin connectors dry and clean to help maintain stable contact during diagnostic communication.Warranty SupportThe listing shows 3-year warranty support. Contact AUTOOL Store for order-specific warranty and maintenance confirmation.Questions And AnswersThese answers cover connector type, cable length, compatible tools, material, package contents, and purchase checks for the AUTOOL 100CM OBDII extension cable. Is This Cable A Diagnostic Scanner? No. This product is an OBD2 extension cable only. It extends the connection between a vehicle OBD2 port and a compatible diagnostic tool, but it does not read fault codes or perform diagnostics by itself. What Connector Type Does It Use? It uses a 16-pin male-to-female OBD2 connector design. One end connects to the vehicle OBD2 diagnostic port, and the other end connects to a compatible 16-pin OBD2 diagnostic tool. How Long Is The Cable? The cable length is 100cm, which is approximately 1m or 39.37inch. The connector width shown in the size image is about 40mm / 1.57inch. What Diagnostic Tools Can It Work With? It is intended for diagnostic tools with a standard 16-pin OBD2 socket, including compatible OBD2 scan tools and ELM327-style adapters. Confirm the connector type on your device before ordering. What Materials Are Used In The Cable? The cable uses a pure copper core for stable data transmission, high-quality plastic and TPE outer materials for flexibility and insulation, and a protective nylon braided sleeve for added durability. Is It Designed For Repeated Plugging? Yes. The original listing describes 8 inspection steps from injection to molding and a cable design intended for more than 10,000 plug-and-unplug cycles under proper use. Avoid pulling, crushing, or sharply bending the connector during operation. What Is Included In The Package? The package includes 1 × AUTOOL 100cm OBD2 16-pin male-to-female extension cable. A diagnostic scanner, ELM327 adapter, software, and extra adapters are not included. Will It Fit Every Vehicle? It is designed for vehicles equipped with a standard 16-pin OBD2 diagnostic interface. Because vehicle ports and diagnostic tool designs may vary, confirm your vehicle port and tool connector before purchase.Warranty And ContactWarranty And ContactFor connector compatibility, OBD2 port confirmation, package contents, order support, or warranty questions for the AUTOOL 100CM OBD2 extension cable, contact AUTOOL Store directly.Pre-Sales And Product SupportUse support if you need help confirming whether this 16-pin male-to-female OBD2 extension cable is suitable for your vehicle port, scan tool, or ELM327-style adapter.3-year warranty support shown in the listing16-pin OBD2 connector confirmationCompatibility check for OBD2 diagnostic tools and ELM327-style adaptersPackage contents and order supportAfter-sales maintenance and replacement guidanceEmail Support[email protected] WhatsApp Support 86 189 2647 7404